The drying process of Dryer Mixer with Dimple Jacket consumes a lot of heat energy. In order to save energy, some materials with high moisture content, suspensions or solutions containing solid substances are generally dehydrated mechanically or heated and evaporated, and then dried in Dryer Mixer with Dimple Jacket. , to obtain a dry solid. The purpose of drying is to meet the needs of material use or further processing. For example, the drying of wood before making wooden molds and woodware can prevent the deformation of the product, and the drying of ceramic blanks before calcination can prevent the finished product from cracking.
In addition, the dried material is also convenient for transportation and storage, such as drying the harvested grain below a certain moisture content to prevent mildew. Since natural drying is far from meeting the needs of production development, various mechanized Dryer Mixer with Dimple Jacket are more and more widely used. During the drying process, it is necessary to complete the transfer of heat and mass (moisture) at the same time, to ensure that the partial pressure (concentration) of the moisture vapor on the surface of the material is higher than that in the external space, and to ensure that the temperature of the heat source is higher than that of the material. The heat is transferred from the high-temperature heat source to the wet material in various ways, so that the moisture on the surface of the material is vaporized and dissipated to the external space, so that there is a difference in the moisture content between the surface and the inside of the material.